HTW
GUIDE
HTW-208
HTW-208 is a waterbased modified amine epoxy curing agent with 60% solid content. When properly formulated, it can get environmental protective coating with following good features:
1. Low VOC with water as the solvent,
2. Overnight re-coating,
3. Better solvent & chemical resistance compared to traditional solventborne or solventless systems,
4. Excellent tolerance to pigment/fillers,
5. Excellent sealing over fresh concrete or dam,
6. Good adhesion to different materials
a) Electrolytic and hot dip galvanized metal
b) Aluminum
c) Untreated or treated cold-rolled steel
d) Aged alkyd and epoxy enamel films
7. Seals wood surfaces without raising nap
8. No bleed-through over asphaltic surfaces
9. Early resistance to wash-off and water spotting
10. Water rinseable to residues and tools after applications
Based on these, it is very suitable to be used in:
1. Synthetic flooring in workshops, public institutions
2. Industrial maintenances—sealants, primers, intermediate coating for film build
3. Baked coil coating
Technical properties:
Amine value: 310-360
Viscosity (25°C, mPa.s ): 2500-6000
Colour (Gardner): ≦ 9
Density (25°C, g/ml): 1.07-1.09
AHEW (g/eq): 174
Solid content: (%) 58-62
HTW-208 should be kept in tightly closed original container in a dry, cool place without direct sunlight. In this case the storage shelf life is at least two years from the manufacturing date.
Package: 200kg/drum
HTW-608
HTW-608 is a self emulsified waterbased modified epoxy resin with 100% solid content. It can be emulsified by water in a wide range of percentage (low to 30%) then formulated with waterborne epoxy curing agent to make coatings on concrete/metal surfaces When properly formulated, it can get environmental protective coating with following good features:
1. Instant emulsiable to avoid any emulsion stability
2. Excellent resistance of settling at low temperature storage
Technical properties:
Appearance: Colourless viscous liquid
Viscosity (25°C, mPa.s ): 8000-12000
Colour (Gardner): ≦ 1
Density (25°C, g/ml): 1.15-1.16
WPE (g/eq): 190-205
HTW-608 should be kept in tightly closed original container in a dry, cool place without direct sunlight. In this case the storage shelf life is at least two years from the manufacturing date.
Package: 220kg/drum
HTW-609
HTW-609 is a self emulsified waterbased modified epoxy resin with 100% solid content. It can be emulsified by water in a wide range of percentage (low to 30%) then formulated with waterborne epoxy curing agent to make coatings on concrete/metal surfaces When properly formulated, it can get environmental protective coating with following good features:
1. Instant emulsiable to avoid any emulsion stability
2. Excellent resistance of settling at low temperature storage
Technical properties:
Appearance: Colourless viscous liquid
Viscosity (25°C, mPa.s ): 8000-12000
Colour (Gardner): ≦ 1
Density (25°C, g/ml): 1.12-1.14
WPE (g/eq): 185-195
HTW-609 should be kept in tightly closed original container in a dry, cool place without direct sunlight. In this case the storage shelf life is at least two years from the manufacturing date.
Package: 220kg/drum